1959 Abarth 1600 vs. 1963 Ford Consul
To start off, 1963 Ford Consul is newer by 4 year(s). Which means there will be less support and parts availability for 1959 Abarth 1600. In addition, the cost of maintenance, including insurance, on 1959 Abarth 1600 would be higher. At 1,586 cc (4 cylinders), 1959 Abarth 1600 is equipped with a bigger engine. In terms of performance, 1959 Abarth 1600 (95 HP @ 6000 RPM) has 42 more horse power than 1963 Ford Consul. (53 HP @ 4900 RPM). In normal driving conditions, 1959 Abarth 1600 should accelerate faster than 1963 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 1959 Abarth 1600 weights approximately 78 kg more than 1963 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1959 Abarth 1600 | 1963 Ford Consul | |
| Make | Abarth | Ford |
| Model | 1600 | Consul |
| Year Released | 1959 | 1963 |
| Engine Position | Front | Front |
| Engine Size | 1586 cc | 1340 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 95 HP | 53 HP |
| Engine RPM | 6000 RPM | 4900 RPM |
| Engine Bore Size | 80.5 mm | 81.1 mm |
| Engine Stroke Size | 78 mm | 65.1 mm |
| Engine Compression Ratio | 9.0:1 | 8.5:1 |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 960 kg | 882 kg |
| Vehicle Length | 4240 mm | 4350 mm |
| Vehicle Width | 1550 mm | 1670 mm |
| Vehicle Height | 1260 mm | 1390 mm |
| Wheelbase Size | 2350 mm | 2590 mm |
