1959 Abarth 2200 vs. 1983 Honda Prelude

To start off, 1983 Honda Prelude is newer by 24 year(s). Which means there will be less support and parts availability for 1959 Abarth 2200. In addition, the cost of maintenance, including insurance, on 1959 Abarth 2200 would be higher. At 2,160 cc (6 cylinders), 1959 Abarth 2200 is equipped with a bigger engine. In terms of performance, 1959 Abarth 2200 (120 HP @ 5400 RPM) has 13 more horse power than 1983 Honda Prelude. (107 HP @ 5500 RPM). In normal driving conditions, 1959 Abarth 2200 should accelerate faster than 1983 Honda Prelude. With that said, vehicle weight also plays an important factor in acceleration. 1959 Abarth 2200 weights approximately 115 kg more than 1983 Honda Prelude. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1959 Abarth 2200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Abarth 2200. However, in wet, icy, snow, or gravel driving conditions, 1983 Honda Prelude, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1959 Abarth 2200 1983 Honda Prelude
Make Abarth Honda
Model 2200 Prelude
Year Released 1959 1983
Body Type Convertible Coupe
Engine Position Front Front
Engine Size 2160 cc 1829 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 120 HP 107 HP
Engine RPM 5400 RPM 5500 RPM
Engine Bore Size 79 mm 80 mm
Engine Stroke Size 73.5 mm 91 mm
Engine Compression Ratio 9.5:1 9.5:1
Top Speed 186 km/hour 183 km/hour
Drive Type Rear Front
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1090 kg 975 kg
Vehicle Length 4640 mm 4320 mm
Vehicle Width 1610 mm 1700 mm
Vehicle Height 1300 mm 1300 mm
Wheelbase Size 2460 mm 2570 mm