1959 Abarth 600 vs. 1958 MG MGA

To start off, 1959 Abarth 600 is newer by 1 year(s). Which means there will be less support and parts availability for 1958 MG MGA. In addition, the cost of maintenance, including insurance, on 1958 MG MGA would be higher. At 1,588 cc (4 cylinders), 1958 MG MGA is equipped with a bigger engine. In terms of performance, 1958 MG MGA (107 HP @ 6700 RPM) has 66 more horse power than 1959 Abarth 600. (41 HP @ 5500 RPM) In normal driving conditions, 1958 MG MGA should accelerate faster than 1959 Abarth 600. With that said, vehicle weight also plays an important factor in acceleration. 1958 MG MGA weights approximately 315 kg more than 1959 Abarth 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 MG MGA (141 Nm @ 4500 RPM) has 87 more torque (in Nm) than 1959 Abarth 600. (54 Nm @ 4000 RPM). This means 1958 MG MGA will have an easier job in driving up hills or pulling heavy equipment than 1959 Abarth 600.

Compare all specifications:

1959 Abarth 600 1958 MG MGA
Make Abarth MG
Model 600 MGA
Year Released 1959 1958
Engine Position Rear Front
Engine Size 747 cc 1588 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 41 HP 107 HP
Engine RPM 5500 RPM 6700 RPM
Torque 54 Nm 141 Nm
Torque RPM 4000 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 585 kg 900 kg
Vehicle Length 3300 mm 3970 mm
Vehicle Width 1390 mm 1460 mm
Vehicle Height 1410 mm 1280 mm
Wheelbase Size 2010 mm 2390 mm