1959 Abarth Bialbero vs. 2010 Chevrolet Impala
To start off, 2010 Chevrolet Impala is newer by 51 year(s). Which means there will be less support and parts availability for 1959 Abarth Bialbero. In addition, the cost of maintenance, including insurance, on 1959 Abarth Bialbero would be higher. At 3,500 cc (6 cylinders), 2010 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Impala (211 HP @ 5800 RPM) has 148 more horse power than 1959 Abarth Bialbero. (63 HP @ 7600 RPM) In normal driving conditions, 2010 Chevrolet Impala should accelerate faster than 1959 Abarth Bialbero. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Impala weights approximately 1043 kg more than 1959 Abarth Bialbero. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1959 Abarth Bialbero is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Abarth Bialbero. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Impala, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Impala (293 Nm @ 4000 RPM) has 224 more torque (in Nm) than 1959 Abarth Bialbero. (69 Nm @ 5800 RPM). This means 2010 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 1959 Abarth Bialbero. 2010 Chevrolet Impala has automatic transmission and 1959 Abarth Bialbero has manual transmission. 1959 Abarth Bialbero will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Impala will be easier to drive especially in heavy traffic.
Compare all specifications:
1959 Abarth Bialbero | 2010 Chevrolet Impala | |
Make | Abarth | Chevrolet |
Model | Bialbero | Impala |
Year Released | 1959 | 2010 |
Engine Position | Rear | Front |
Engine Size | 694 cc | 3500 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 63 HP | 211 HP |
Engine RPM | 7600 RPM | 5800 RPM |
Torque | 69 Nm | 293 Nm |
Torque RPM | 5800 RPM | 4000 RPM |
Fuel Type | Gasoline | Flex Fuel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 570 kg | 1613 kg |
Vehicle Length | 3480 mm | 5090 mm |
Vehicle Width | 1360 mm | 1852 mm |
Vehicle Height | 1110 mm | 1491 mm |
Wheelbase Size | 2010 mm | 2807 mm |