1959 Austin A 95 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 51 year(s). Which means there will be less support and parts availability for 1959 Austin A 95. In addition, the cost of maintenance, including insurance, on 1959 Austin A 95 would be higher. At 2,638 cc (6 cylinders), 1959 Austin A 95 is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 82 more horse power than 1959 Austin A 95. (91 HP @ 4500 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1959 Austin A 95. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 585 kg more than 1959 Austin A 95. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1959 Austin A 95 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Austin A 95. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (225 Nm @ 4400 RPM) has 49 more torque (in Nm) than 1959 Austin A 95. (176 Nm @ 2000 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1959 Austin A 95. 2010 Chrysler Sebring has automatic transmission and 1959 Austin A 95 has manual transmission. 1959 Austin A 95 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1959 Austin A 95 | 2010 Chrysler Sebring | |
Make | Austin | Chrysler |
Model | A 95 | Sebring |
Year Released | 1959 | 2010 |
Engine Position | Front | Front |
Engine Size | 2638 cc | 2360 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 91 HP | 173 HP |
Engine RPM | 4500 RPM | 6000 RPM |
Torque | 176 Nm | 225 Nm |
Torque RPM | 2000 RPM | 4400 RPM |
Engine Bore Size | 79.4 mm | 86 mm |
Engine Stroke Size | 88.9 mm | 101 mm |
Engine Compression Ratio | 8.3:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1325 kg | 1910 kg |
Vehicle Length | 4600 mm | 4850 mm |
Vehicle Width | 1630 mm | 1810 mm |
Vehicle Height | 1580 mm | 1510 mm |
Wheelbase Size | 2690 mm | 2770 mm |
Fuel Tank Capacity | 72 L | 64 L |