1959 Austin A 95 vs. 2012 Peugeot 5008

To start off, 2012 Peugeot 5008 is newer by 53 year(s). Which means there will be less support and parts availability for 1959 Austin A 95. In addition, the cost of maintenance, including insurance, on 1959 Austin A 95 would be higher. At 2,638 cc (6 cylinders), 1959 Austin A 95 is equipped with a bigger engine. In terms of performance, 2012 Peugeot 5008 (108 HP @ 4000 RPM) has 17 more horse power than 1959 Austin A 95. (91 HP @ 4500 RPM) In normal driving conditions, 2012 Peugeot 5008 should accelerate faster than 1959 Austin A 95.

Because 1959 Austin A 95 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Austin A 95. However, in wet, icy, snow, or gravel driving conditions, 2012 Peugeot 5008, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Peugeot 5008 (240 Nm @ 1750 RPM) has 64 more torque (in Nm) than 1959 Austin A 95. (176 Nm @ 2000 RPM). This means 2012 Peugeot 5008 will have an easier job in driving up hills or pulling heavy equipment than 1959 Austin A 95.

Compare all specifications:

1959 Austin A 95 2012 Peugeot 5008
Make Austin Peugeot
Model A 95 5008
Year Released 1959 2012
Engine Position Front Front
Engine Size 2638 cc 1560 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 91 HP 108 HP
Engine RPM 4500 RPM 4000 RPM
Torque 176 Nm 240 Nm
Torque RPM 2000 RPM 1750 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 7 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4600 mm 4530 mm
Vehicle Width 1630 mm 1835 mm
Vehicle Height 1580 mm 1640 mm
Wheelbase Size 2690 mm 2735 mm