1959 BMW Isetta vs. 1991 Holden Commodore

To start off, 1991 Holden Commodore is newer by 32 year(s). Which means there will be less support and parts availability for 1959 BMW Isetta. In addition, the cost of maintenance, including insurance, on 1959 BMW Isetta would be higher. At 3,791 cc (6 cylinders), 1991 Holden Commodore is equipped with a bigger engine. In terms of performance, 1991 Holden Commodore (168 HP) has 155 more horse power than 1959 BMW Isetta. (13 HP) In normal driving conditions, 1991 Holden Commodore should accelerate faster than 1959 BMW Isetta. With that said, vehicle weight also plays an important factor in acceleration. 1991 Holden Commodore weights approximately 950 kg more than 1959 BMW Isetta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. 1991 Holden Commodore has automatic transmission and 1959 BMW Isetta has manual transmission. 1959 BMW Isetta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1991 Holden Commodore will be easier to drive especially in heavy traffic.

Compare all specifications:

1959 BMW Isetta 1991 Holden Commodore
Make BMW Holden
Model Isetta Commodore
Year Released 1959 1991
Engine Position Rear Front
Engine Size 247 cc 3791 cc
Engine Cylinders 1 cylinders 6 cylinders
Engine Type single in-line
Horse Power 13 HP 168 HP
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 1 doors 4 doors
Vehicle Weight 360 kg 1310 kg
Vehicle Length 2300 mm 4860 mm
Vehicle Width 1390 mm 1800 mm
Vehicle Height 1350 mm 1410 mm
Wheelbase Size 1510 mm 2740 mm