1959 Ferrari 250 GT vs. 2010 Fiat Panda

To start off, 2010 Fiat Panda is newer by 51 year(s). Which means there will be less support and parts availability for 1959 Ferrari 250 GT. In addition, the cost of maintenance, including insurance, on 1959 Ferrari 250 GT would be higher. At 2,953 cc (12 cylinders), 1959 Ferrari 250 GT is equipped with a bigger engine. In terms of performance, 1959 Ferrari 250 GT (247 HP @ 7000 RPM) has 188 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1959 Ferrari 250 GT should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1959 Ferrari 250 GT weights approximately 324 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1959 Ferrari 250 GT is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Ferrari 250 GT. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1959 Ferrari 250 GT (246 Nm @ 5000 RPM) has 144 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 1959 Ferrari 250 GT will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 2010 Fiat Panda has automatic transmission and 1959 Ferrari 250 GT has manual transmission. 1959 Ferrari 250 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Fiat Panda will be easier to drive especially in heavy traffic.

Compare all specifications:

1959 Ferrari 250 GT 2010 Fiat Panda
Make Ferrari Fiat
Model 250 GT Panda
Year Released 1959 2010
Engine Position Front Front
Engine Size 2953 cc 1242 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 247 HP 59 HP
Engine RPM 7000 RPM 5000 RPM
Torque 246 Nm 102 Nm
Torque RPM 5000 RPM 2500 RPM
Engine Bore Size 73 mm 70.9 mm
Engine Stroke Size 58.8 mm 78.9 mm
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1277 kg 953 kg
Vehicle Length 4710 mm 3540 mm
Vehicle Width 1710 mm 1600 mm
Vehicle Height 1350 mm 1580 mm
Wheelbase Size 2610 mm 2310 mm
Fuel Tank Capacity 100 L 35 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]