1959 Holden FC vs. 1990 Lancia Dedra
To start off, 1990 Lancia Dedra is newer by 31 year(s). Which means there will be less support and parts availability for 1959 Holden FC. In addition, the cost of maintenance, including insurance, on 1959 Holden FC would be higher. At 2,166 cc (6 cylinders), 1959 Holden FC is equipped with a bigger engine. In terms of performance, 1990 Lancia Dedra (111 HP @ 5750 RPM) has 49 more horse power than 1959 Holden FC. (62 HP @ 4000 RPM) In normal driving conditions, 1990 Lancia Dedra should accelerate faster than 1959 Holden FC. With that said, vehicle weight also plays an important factor in acceleration. 1990 Lancia Dedra weights approximately 226 kg more than 1959 Holden FC. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1959 Holden FC is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Holden FC. However, in wet, icy, snow, or gravel driving conditions, 1990 Lancia Dedra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Lancia Dedra (157 Nm @ 3300 RPM) has 7 more torque (in Nm) than 1959 Holden FC. (150 Nm @ 1400 RPM). This means 1990 Lancia Dedra will have an easier job in driving up hills or pulling heavy equipment than 1959 Holden FC. 1990 Lancia Dedra has automatic transmission and 1959 Holden FC has manual transmission. 1959 Holden FC will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Lancia Dedra will be easier to drive especially in heavy traffic.
Compare all specifications:
1959 Holden FC | 1990 Lancia Dedra | |
Make | Holden | Lancia |
Model | FC | Dedra |
Year Released | 1959 | 1990 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 2166 cc | 1995 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 62 HP | 111 HP |
Engine RPM | 4000 RPM | 5750 RPM |
Torque | 150 Nm | 157 Nm |
Torque RPM | 1400 RPM | 3300 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 984 kg | 1210 kg |
Vehicle Length | 4480 mm | 4350 mm |
Vehicle Width | 1710 mm | 1710 mm |
Vehicle Height | 1560 mm | 1430 mm |
Wheelbase Size | 2670 mm | 2550 mm |