1959 Lancia Appia vs. 2000 Mercedes-Benz V
To start off, 2000 Mercedes-Benz V is newer by 41 year(s). Which means there will be less support and parts availability for 1959 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1959 Lancia Appia would be higher. At 2,293 cc (4 cylinders), 2000 Mercedes-Benz V is equipped with a bigger engine. In terms of performance, 2000 Mercedes-Benz V (139 HP @ 5000 RPM) has 96 more horse power than 1959 Lancia Appia. (43 HP @ 4800 RPM) In normal driving conditions, 2000 Mercedes-Benz V should accelerate faster than 1959 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2000 Mercedes-Benz V weights approximately 1140 kg more than 1959 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1959 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2000 Mercedes-Benz V, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Mercedes-Benz V (210 Nm @ 4000 RPM) has 133 more torque (in Nm) than 1959 Lancia Appia. (77 Nm @ 3000 RPM). This means 2000 Mercedes-Benz V will have an easier job in driving up hills or pulling heavy equipment than 1959 Lancia Appia. 2000 Mercedes-Benz V has automatic transmission and 1959 Lancia Appia has manual transmission. 1959 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Mercedes-Benz V will be easier to drive especially in heavy traffic.
Compare all specifications:
1959 Lancia Appia | 2000 Mercedes-Benz V | |
Make | Lancia | Mercedes-Benz |
Model | Appia | V |
Year Released | 1959 | 2000 |
Engine Position | Front | Front |
Engine Size | 1089 cc | 2293 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 43 HP | 139 HP |
Engine RPM | 4800 RPM | 5000 RPM |
Torque | 77 Nm | 210 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 860 kg | 2000 kg |
Vehicle Length | 3980 mm | 4670 mm |
Vehicle Width | 1430 mm | 1880 mm |
Vehicle Height | 1410 mm | 1850 mm |
Wheelbase Size | 2520 mm | 3010 mm |