1959 Peugeot 203 vs. 2003 Toyota Sequoia

To start off, 2003 Toyota Sequoia is newer by 44 year(s). Which means there will be less support and parts availability for 1959 Peugeot 203. In addition, the cost of maintenance, including insurance, on 1959 Peugeot 203 would be higher. At 4,663 cc (8 cylinders), 2003 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2003 Toyota Sequoia (238 HP @ 4800 RPM) has 194 more horse power than 1959 Peugeot 203. (44 HP @ 4500 RPM) In normal driving conditions, 2003 Toyota Sequoia should accelerate faster than 1959 Peugeot 203. With that said, vehicle weight also plays an important factor in acceleration. 2003 Toyota Sequoia weights approximately 1375 kg more than 1959 Peugeot 203. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Toyota Sequoia is four wheel drive (4WD), it will have significant more traction and grip than 1959 Peugeot 203. In wet, icy, snow, or gravel driving conditions, 2003 Toyota Sequoia will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Toyota Sequoia (427 Nm @ 3400 RPM) has 347 more torque (in Nm) than 1959 Peugeot 203. (80 Nm @ 2500 RPM). This means 2003 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 1959 Peugeot 203. 2003 Toyota Sequoia has automatic transmission and 1959 Peugeot 203 has manual transmission. 1959 Peugeot 203 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Toyota Sequoia will be easier to drive especially in heavy traffic.

Compare all specifications:

1959 Peugeot 203 2003 Toyota Sequoia
Make Peugeot Toyota
Model 203 Sequoia
Year Released 1959 2003
Engine Position Front Front
Engine Size 1289 cc 4663 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 44 HP 238 HP
Engine RPM 4500 RPM 4800 RPM
Torque 80 Nm 427 Nm
Torque RPM 2500 RPM 3400 RPM
Engine Bore Size 75 mm 94 mm
Engine Stroke Size 73 mm 84 mm
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 925 kg 2300 kg
Vehicle Length 4360 mm 5190 mm
Vehicle Width 1610 mm 1950 mm
Vehicle Height 1510 mm 1870 mm
Wheelbase Size 2580 mm 3010 mm