1959 Porsche 356 vs. 2010 Lancia Ypsilon

To start off, 2010 Lancia Ypsilon is newer by 51 year(s). Which means there will be less support and parts availability for 1959 Porsche 356. In addition, the cost of maintenance, including insurance, on 1959 Porsche 356 would be higher. At 1,582 cc (4 cylinders), 1959 Porsche 356 is equipped with a bigger engine. In terms of performance, 2010 Lancia Ypsilon (94 HP @ 5800 RPM) has 19 more horse power than 1959 Porsche 356. (75 HP @ 5000 RPM) In normal driving conditions, 2010 Lancia Ypsilon should accelerate faster than 1959 Porsche 356. With that said, vehicle weight also plays an important factor in acceleration. 2010 Lancia Ypsilon weights approximately 217 kg more than 1959 Porsche 356. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1959 Porsche 356 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1959 Porsche 356. However, in wet, icy, snow, or gravel driving conditions, 2010 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Lancia Ypsilon (128 Nm @ 4500 RPM) has 9 more torque (in Nm) than 1959 Porsche 356. (119 Nm @ 3700 RPM). This means 2010 Lancia Ypsilon will have an easier job in driving up hills or pulling heavy equipment than 1959 Porsche 356. 2010 Lancia Ypsilon has automatic transmission and 1959 Porsche 356 has manual transmission. 1959 Porsche 356 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Lancia Ypsilon will be easier to drive especially in heavy traffic.

Compare all specifications:

1959 Porsche 356 2010 Lancia Ypsilon
Make Porsche Lancia
Model 356 Ypsilon
Year Released 1959 2010
Engine Position Rear Front
Engine Size 1582 cc 1368 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 75 HP 94 HP
Engine RPM 5000 RPM 5800 RPM
Torque 119 Nm 128 Nm
Torque RPM 3700 RPM 4500 RPM
Engine Bore Size 82.5 mm 72 mm
Engine Stroke Size 74 mm 84 mm
Engine Compression Ratio 8.5:1 11.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 838 kg 1055 kg
Vehicle Length 3960 mm 3820 mm
Vehicle Width 1670 mm 1710 mm
Vehicle Height 1310 mm 1540 mm
Wheelbase Size 2110 mm 2390 mm
Fuel Tank Capacity 52 L 47 L