1960 Abarth 1000 Bialbero vs. 1965 Fiat Coupe
To start off, 1965 Fiat Coupe is newer by 5 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000 Bialbero. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 Bialbero would be higher. At 2,277 cc (6 cylinders), 1965 Fiat Coupe is equipped with a bigger engine. In terms of performance, 1965 Fiat Coupe (148 HP @ 5600 RPM) has 57 more horse power than 1960 Abarth 1000 Bialbero. (91 HP @ 7100 RPM) In normal driving conditions, 1965 Fiat Coupe should accelerate faster than 1960 Abarth 1000 Bialbero. With that said, vehicle weight also plays an important factor in acceleration. 1965 Fiat Coupe weights approximately 660 kg more than 1960 Abarth 1000 Bialbero. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1965 Fiat Coupe (200 Nm @ 4000 RPM) has 96 more torque (in Nm) than 1960 Abarth 1000 Bialbero. (104 Nm @ 5500 RPM). This means 1965 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000 Bialbero.
Compare all specifications:
1960 Abarth 1000 Bialbero | 1965 Fiat Coupe | |
Make | Abarth | Fiat |
Model | 1000 Bialbero | Coupe |
Year Released | 1960 | 1965 |
Engine Position | Rear | Front |
Engine Size | 982 cc | 2277 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 91 HP | 148 HP |
Engine RPM | 7100 RPM | 5600 RPM |
Torque | 104 Nm | 200 Nm |
Torque RPM | 5500 RPM | 4000 RPM |
Engine Bore Size | 65 mm | 78 mm |
Engine Stroke Size | 74 mm | 79.5 mm |
Engine Compression Ratio | 9.3:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 570 kg | 1230 kg |
Vehicle Length | 3600 mm | 4630 mm |
Vehicle Width | 1400 mm | 1640 mm |
Vehicle Height | 1180 mm | 1370 mm |
Wheelbase Size | 2010 mm | 2660 mm |
Fuel Tank Capacity | 27 L | 38 L |