1960 Abarth 1000 Bialbero vs. 2008 Mercury Sable
To start off, 2008 Mercury Sable is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000 Bialbero. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 Bialbero would be higher. At 3,495 cc (6 cylinders), 2008 Mercury Sable is equipped with a bigger engine. In terms of performance, 2008 Mercury Sable (260 HP @ 6250 RPM) has 169 more horse power than 1960 Abarth 1000 Bialbero. (91 HP @ 7100 RPM) In normal driving conditions, 2008 Mercury Sable should accelerate faster than 1960 Abarth 1000 Bialbero. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercury Sable weights approximately 1262 kg more than 1960 Abarth 1000 Bialbero. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Abarth 1000 Bialbero is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Abarth 1000 Bialbero. However, in wet, icy, snow, or gravel driving conditions, 2008 Mercury Sable, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercury Sable (332 Nm @ 4500 RPM) has 228 more torque (in Nm) than 1960 Abarth 1000 Bialbero. (104 Nm @ 5500 RPM). This means 2008 Mercury Sable will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000 Bialbero. 2008 Mercury Sable has automatic transmission and 1960 Abarth 1000 Bialbero has manual transmission. 1960 Abarth 1000 Bialbero will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercury Sable will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1960 Abarth 1000 Bialbero | 2008 Mercury Sable | |
| Make | Abarth | Mercury |
| Model | 1000 Bialbero | Sable |
| Year Released | 1960 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 982 cc | 3495 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 91 HP | 260 HP |
| Engine RPM | 7100 RPM | 6250 RPM |
| Torque | 104 Nm | 332 Nm |
| Torque RPM | 5500 RPM | 4500 RPM |
| Engine Compression Ratio | 9.3:1 | 10.3:1 |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 570 kg | 1832 kg |
| Vehicle Length | 3600 mm | 5100 mm |
| Vehicle Width | 1400 mm | 1900 mm |
| Vehicle Height | 1180 mm | 1570 mm |
| Wheelbase Size | 2010 mm | 2870 mm |
| Fuel Tank Capacity | 27 L | 78 L |
