1960 Abarth 1000 Bialbero vs. 2013 Toyota Highlander
To start off, 2013 Toyota Highlander is newer by 53 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000 Bialbero. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 Bialbero would be higher. At 2,700 cc (4 cylinders), 2013 Toyota Highlander is equipped with a bigger engine. In terms of performance, 2013 Toyota Highlander (184 HP @ 5800 RPM) has 93 more horse power than 1960 Abarth 1000 Bialbero. (91 HP @ 7100 RPM) In normal driving conditions, 2013 Toyota Highlander should accelerate faster than 1960 Abarth 1000 Bialbero. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Highlander weights approximately 1175 kg more than 1960 Abarth 1000 Bialbero. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Abarth 1000 Bialbero is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Abarth 1000 Bialbero. However, in wet, icy, snow, or gravel driving conditions, 2013 Toyota Highlander, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Highlander (252 Nm @ 4100 RPM) has 148 more torque (in Nm) than 1960 Abarth 1000 Bialbero. (104 Nm @ 5500 RPM). This means 2013 Toyota Highlander will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000 Bialbero. 2013 Toyota Highlander has automatic transmission and 1960 Abarth 1000 Bialbero has manual transmission. 1960 Abarth 1000 Bialbero will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Highlander will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1960 Abarth 1000 Bialbero | 2013 Toyota Highlander | |
| Make | Abarth | Toyota |
| Model | 1000 Bialbero | Highlander |
| Year Released | 1960 | 2013 |
| Engine Position | Rear | Front |
| Engine Size | 982 cc | 2700 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 91 HP | 184 HP |
| Engine RPM | 7100 RPM | 5800 RPM |
| Torque | 104 Nm | 252 Nm |
| Torque RPM | 5500 RPM | 4100 RPM |
| Engine Bore Size | 65 mm | 90 mm |
| Engine Stroke Size | 74 mm | 105 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 570 kg | 1745 kg |
| Vehicle Length | 3600 mm | 4785 mm |
| Vehicle Width | 1400 mm | 1910 mm |
| Vehicle Height | 1180 mm | 1760 mm |
| Wheelbase Size | 2010 mm | 2790 mm |
| Fuel Tank Capacity | 27 L | 73 L |
