1960 Abarth 1000 vs. 1980 Cadillac Seville
To start off, 1980 Cadillac Seville is newer by 20 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 would be higher. At 6,030 cc (8 cylinders), 1980 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1980 Cadillac Seville (143 HP @ 3600 RPM) has 56 more horse power than 1960 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 1980 Cadillac Seville should accelerate faster than 1960 Abarth 1000. With that said, vehicle weight also plays an important factor in acceleration. 1980 Cadillac Seville weights approximately 990 kg more than 1960 Abarth 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Abarth 1000 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Abarth 1000. However, in wet, icy, snow, or gravel driving conditions, 1980 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Cadillac Seville (365 Nm @ 2000 RPM) has 269 more torque (in Nm) than 1960 Abarth 1000. (96 Nm @ 5000 RPM). This means 1980 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000. 1980 Cadillac Seville has automatic transmission and 1960 Abarth 1000 has manual transmission. 1960 Abarth 1000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1960 Abarth 1000 | 1980 Cadillac Seville | |
| Make | Abarth | Cadillac |
| Model | 1000 | Seville |
| Year Released | 1960 | 1980 |
| Engine Position | Rear | Front |
| Engine Size | 992 cc | 6030 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 87 HP | 143 HP |
| Engine RPM | 8000 RPM | 3600 RPM |
| Torque | 96 Nm | 365 Nm |
| Torque RPM | 5000 RPM | 2000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 680 kg | 1670 kg |
| Vehicle Length | 3700 mm | 5210 mm |
| Vehicle Width | 1560 mm | 1820 mm |
| Vehicle Height | 1210 mm | 1390 mm |
| Wheelbase Size | 2170 mm | 2900 mm |
