1960 Abarth 1000 vs. 1998 Chrysler Concorde
To start off, 1998 Chrysler Concorde is newer by 38 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 would be higher. At 2,734 cc (6 cylinders), 1998 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 1998 Chrysler Concorde (190 HP @ 5800 RPM) has 103 more horse power than 1960 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 1998 Chrysler Concorde should accelerate faster than 1960 Abarth 1000. With that said, vehicle weight also plays an important factor in acceleration. 1998 Chrysler Concorde weights approximately 895 kg more than 1960 Abarth 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Abarth 1000 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Abarth 1000. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Chrysler Concorde (255 Nm @ 4850 RPM) has 159 more torque (in Nm) than 1960 Abarth 1000. (96 Nm @ 5000 RPM). This means 1998 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000. 1998 Chrysler Concorde has automatic transmission and 1960 Abarth 1000 has manual transmission. 1960 Abarth 1000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
1960 Abarth 1000 | 1998 Chrysler Concorde | |
Make | Abarth | Chrysler |
Model | 1000 | Concorde |
Year Released | 1960 | 1998 |
Engine Position | Rear | Front |
Engine Size | 992 cc | 2734 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 87 HP | 190 HP |
Engine RPM | 8000 RPM | 5800 RPM |
Torque | 96 Nm | 255 Nm |
Torque RPM | 5000 RPM | 4850 RPM |
Engine Bore Size | 74 mm | 86 mm |
Engine Stroke Size | 58 mm | 78.5 mm |
Engine Compression Ratio | 10.1:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 680 kg | 1575 kg |
Vehicle Length | 3700 mm | 5280 mm |
Vehicle Width | 1560 mm | 1900 mm |
Vehicle Height | 1210 mm | 1420 mm |
Wheelbase Size | 2170 mm | 2880 mm |
Fuel Tank Capacity | 60 L | 68 L |