1960 Abarth 1000 vs. 2005 Chrysler 300
To start off, 2005 Chrysler 300 is newer by 45 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 would be higher. At 3,516 cc (6 cylinders), 2005 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2005 Chrysler 300 (250 HP @ 6400 RPM) has 163 more horse power than 1960 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 2005 Chrysler 300 should accelerate faster than 1960 Abarth 1000. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chrysler 300 weights approximately 1029 kg more than 1960 Abarth 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2005 Chrysler 300 (340 Nm) has 244 more torque (in Nm) than 1960 Abarth 1000. (96 Nm). This means 2005 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000.
Compare all specifications:
| 1960 Abarth 1000 | 2005 Chrysler 300 | |
| Make | Abarth | Chrysler |
| Model | 1000 | 300 |
| Year Released | 1960 | 2005 |
| Engine Position | Rear | Front |
| Engine Size | 992 cc | 3516 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 87 HP | 250 HP |
| Engine RPM | 8000 RPM | 6400 RPM |
| Torque | 96 Nm | 340 Nm |
| Engine Bore Size | 74 mm | 96 mm |
| Engine Stroke Size | 58 mm | 81 mm |
| Engine Compression Ratio | 10.1:1 | 9.9:1 |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 680 kg | 1709 kg |
| Vehicle Length | 3700 mm | 5010 mm |
| Vehicle Width | 1560 mm | 1890 mm |
| Vehicle Height | 1210 mm | 1490 mm |
| Wheelbase Size | 2170 mm | 3190 mm |
| Fuel Tank Capacity | 60 L | 68 L |
