1960 Abarth 1000 vs. 2008 Toyota Sequoia

To start off, 2008 Toyota Sequoia is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1960 Abarth 1000 would be higher. At 5,663 cc (8 cylinders), 2008 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2008 Toyota Sequoia (381 HP @ 5600 RPM) has 294 more horse power than 1960 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 2008 Toyota Sequoia should accelerate faster than 1960 Abarth 1000. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Sequoia weights approximately 650 kg more than 1960 Abarth 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1960 Abarth 1000 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Abarth 1000. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Sequoia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Toyota Sequoia (544 Nm @ 3600 RPM) has 448 more torque (in Nm) than 1960 Abarth 1000. (96 Nm @ 5000 RPM). This means 2008 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 1000. 2008 Toyota Sequoia has automatic transmission and 1960 Abarth 1000 has manual transmission. 1960 Abarth 1000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Toyota Sequoia will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Abarth 1000 2008 Toyota Sequoia
Make Abarth Toyota
Model 1000 Sequoia
Year Released 1960 2008
Engine Position Rear Front
Engine Size 992 cc 5663 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 87 HP 381 HP
Engine RPM 8000 RPM 5600 RPM
Torque 96 Nm 544 Nm
Torque RPM 5000 RPM 3600 RPM
Engine Compression Ratio 10.1:1 10.2:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 680 kg 1330 kg
Vehicle Length 3700 mm 5220 mm
Vehicle Width 1560 mm 2040 mm
Vehicle Height 1210 mm 1920 mm
Wheelbase Size 2170 mm 3110 mm
Fuel Tank Capacity 60 L 100 L