1960 Abarth 600 vs. 2008 Mazda DrifterX
To start off, 2008 Mazda DrifterX is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Abarth 600. In addition, the cost of maintenance, including insurance, on 1960 Abarth 600 would be higher. At 2,499 cc (4 cylinders), 2008 Mazda DrifterX is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda DrifterX weights approximately 885 kg more than 1960 Abarth 600.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda DrifterX (257 Nm @ 2000 RPM) has 200 more torque (in Nm) than 1960 Abarth 600. (57 Nm @ 4500 RPM). This means 2008 Mazda DrifterX will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 600.
Compare all specifications:
| 1960 Abarth 600 | 2008 Mazda DrifterX | |
| Make | Abarth | Mazda |
| Model | 600 | DrifterX |
| Year Released | 1960 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 747 cc | 2499 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 3 valves |
| Horse Power | 43 HP | 0 HP |
| Torque | 57 Nm | 257 Nm |
| Torque RPM | 4500 RPM | 2000 RPM |
| Engine Compression Ratio | 9.0:1 | 21.6:1 |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 595 kg | 1480 kg |
| Vehicle Length | 3300 mm | 5010 mm |
| Vehicle Height | 1410 mm | 1760 mm |
| Wheelbase Size | 2010 mm | 3010 mm |
| Fuel Tank Capacity | 27 L | 80 L |
