1960 Abarth 700 vs. 2010 BMW 120

To start off, 2010 BMW 120 is newer by 50 year(s). Which means there will be less support and parts availability for 1960 Abarth 700. In addition, the cost of maintenance, including insurance, on 1960 Abarth 700 would be higher. At 1,995 cc (4 cylinders), 2010 BMW 120 is equipped with a bigger engine. In terms of performance, 2010 BMW 120 (168 HP @ 6700 RPM) has 105 more horse power than 1960 Abarth 700. (63 HP @ 7800 RPM) In normal driving conditions, 2010 BMW 120 should accelerate faster than 1960 Abarth 700. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 120 weights approximately 855 kg more than 1960 Abarth 700. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1960 Abarth 700 2010 BMW 120
Make Abarth BMW
Model 700 120
Year Released 1960 2010
Engine Position Rear Front
Engine Size 696 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 63 HP 168 HP
Engine RPM 7800 RPM 6700 RPM
Engine Bore Size 61 mm 84 mm
Engine Stroke Size 59.5 mm 90 mm
Engine Compression Ratio 10.0:1 12.0:1
Fuel Type Gasoline Gasoline
Top Speed 180 km/hour 220 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 560 kg 1415 kg
Vehicle Length 3480 mm 4370 mm
Vehicle Width 1360 mm 1420 mm
Vehicle Height 1110 mm 1760 mm
Wheelbase Size 2010 mm 2670 mm
Fuel Tank Capacity 27 L 53 L