1960 Abarth 850 vs. 1960 Austin A 55

To start off, both 1960 Abarth 850 and 1960 Austin A 55 were released in the same year (1960). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,489 cc (4 cylinders), 1960 Austin A 55 is equipped with a bigger engine. In terms of performance, both vehicles can yield 51 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1960 Austin A 55 weights approximately 552 kg more than 1960 Abarth 850.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Austin A 55 (111 Nm @ 2100 RPM) has 41 more torque (in Nm) than 1960 Abarth 850. (70 Nm @ 4500 RPM). This means 1960 Austin A 55 will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 850.

Compare all specifications:

1960 Abarth 850 1960 Austin A 55
Make Abarth Austin
Model 850 A 55
Year Released 1960 1960
Engine Position Rear Front
Engine Size 850 cc 1489 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 51 HP
Engine RPM 6000 RPM 4350 RPM
Torque 70 Nm 111 Nm
Torque RPM 4500 RPM 2100 RPM
Engine Compression Ratio 9.0:1 8.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 570 kg 1122 kg
Vehicle Length 3600 mm 4530 mm
Vehicle Width 1360 mm 1620 mm
Vehicle Height 1180 mm 1530 mm
Wheelbase Size 2010 mm 2530 mm
Fuel Tank Capacity 60 L 45 L