1960 Abarth 850 vs. 1985 Mitsubishi Sigma

To start off, 1985 Mitsubishi Sigma is newer by 25 year(s). Which means there will be less support and parts availability for 1960 Abarth 850. In addition, the cost of maintenance, including insurance, on 1960 Abarth 850 would be higher. At 1,995 cc (4 cylinders), 1985 Mitsubishi Sigma is equipped with a bigger engine. In terms of performance, 1985 Mitsubishi Sigma (94 HP @ 5600 RPM) has 43 more horse power than 1960 Abarth 850. (51 HP @ 6000 RPM) In normal driving conditions, 1985 Mitsubishi Sigma should accelerate faster than 1960 Abarth 850. With that said, vehicle weight also plays an important factor in acceleration. 1985 Mitsubishi Sigma weights approximately 500 kg more than 1960 Abarth 850. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Mitsubishi Sigma (152 Nm @ 2400 RPM) has 82 more torque (in Nm) than 1960 Abarth 850. (70 Nm @ 4500 RPM). This means 1985 Mitsubishi Sigma will have an easier job in driving up hills or pulling heavy equipment than 1960 Abarth 850.

Compare all specifications:

1960 Abarth 850 1985 Mitsubishi Sigma
Make Abarth Mitsubishi
Model 850 Sigma
Year Released 1960 1985
Engine Position Rear Front
Engine Size 850 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 51 HP 94 HP
Engine RPM 6000 RPM 5600 RPM
Torque 70 Nm 152 Nm
Torque RPM 4500 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 570 kg 1070 kg
Vehicle Length 3600 mm 4460 mm
Vehicle Width 1360 mm 1660 mm
Vehicle Height 1180 mm 1370 mm
Wheelbase Size 2010 mm 2520 mm