1960 Aston Martin DB2 vs. 2008 Mitsubishi Outlander
To start off, 2008 Mitsubishi Outlander is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1960 Aston Martin DB2 would be higher. At 2,998 cc (6 cylinders), 2008 Mitsubishi Outlander is equipped with a bigger engine. In terms of performance, 2008 Mitsubishi Outlander (220 HP @ 6250 RPM) has 102 more horse power than 1960 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2008 Mitsubishi Outlander should accelerate faster than 1960 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mitsubishi Outlander weights approximately 1 kg more than 1960 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2008 Mitsubishi Outlander, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mitsubishi Outlander (277 Nm @ 4000 RPM) has 36 more torque (in Nm) than 1960 Aston Martin DB2. (241 Nm @ 3000 RPM). This means 2008 Mitsubishi Outlander will have an easier job in driving up hills or pulling heavy equipment than 1960 Aston Martin DB2. 2008 Mitsubishi Outlander has automatic transmission and 1960 Aston Martin DB2 has manual transmission. 1960 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mitsubishi Outlander will be easier to drive especially in heavy traffic.
Compare all specifications:
1960 Aston Martin DB2 | 2008 Mitsubishi Outlander | |
Make | Aston Martin | Mitsubishi |
Model | DB2 | Outlander |
Year Released | 1960 | 2008 |
Body Type | Coupe | SUV |
Engine Position | Front | Front |
Engine Size | 2922 cc | 2998 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 118 HP | 220 HP |
Engine RPM | 5000 RPM | 6250 RPM |
Torque | 241 Nm | 277 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1175 kg | 1176 kg |
Vehicle Length | 4310 mm | 4650 mm |
Vehicle Width | 1660 mm | 1810 mm |
Vehicle Height | 1370 mm | 1690 mm |
Wheelbase Size | 2520 mm | 2680 mm |
Fuel Tank Capacity | 86 L | 63 L |