1960 Austin A 55 vs. 2008 Mercedes-Benz A
To start off, 2008 Mercedes-Benz A is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Austin A 55. In addition, the cost of maintenance, including insurance, on 1960 Austin A 55 would be higher. At 1,898 cc, 2008 Mercedes-Benz A is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz A weights approximately 33 kg more than 1960 Austin A 55.
Because 1960 Austin A 55 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Austin A 55. However, in wet, icy, snow, or gravel driving conditions, 2008 Mercedes-Benz A, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz A (180 Nm @ 4000 RPM) has 69 more torque (in Nm) than 1960 Austin A 55. (111 Nm @ 2100 RPM). This means 2008 Mercedes-Benz A will have an easier job in driving up hills or pulling heavy equipment than 1960 Austin A 55.
Compare all specifications:
1960 Austin A 55 | 2008 Mercedes-Benz A | |
Make | Austin | Mercedes-Benz |
Model | A 55 | A |
Year Released | 1960 | 2008 |
Engine Position | Front | Front |
Engine Size | 1489 cc | 1898 cc |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 51 HP | 0 HP |
Torque | 111 Nm | 180 Nm |
Torque RPM | 2100 RPM | 4000 RPM |
Engine Compression Ratio | 8.3:1 | 10.8:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 5 doors |
Vehicle Weight | 1122 kg | 1155 kg |
Vehicle Length | 4530 mm | 3610 mm |
Vehicle Width | 1620 mm | 1730 mm |
Vehicle Height | 1530 mm | 1590 mm |
Wheelbase Size | 2530 mm | 2430 mm |
Fuel Tank Capacity | 45 L | 54 L |