1960 Austin A 90 vs. 2009 Mercedes-Benz CL

To start off, 2009 Mercedes-Benz CL is newer by 49 year(s). Which means there will be less support and parts availability for 1960 Austin A 90. In addition, the cost of maintenance, including insurance, on 1960 Austin A 90 would be higher. At 5,512 cc (12 cylinders), 2009 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CL (510 HP @ 5000 RPM) has 408 more horse power than 1960 Austin A 90. (102 HP @ 4500 RPM) In normal driving conditions, 2009 Mercedes-Benz CL should accelerate faster than 1960 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CL weights approximately 685 kg more than 1960 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CL (830 Nm @ 1800 RPM) has 616 more torque (in Nm) than 1960 Austin A 90. (214 Nm @ 2000 RPM). This means 2009 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1960 Austin A 90. 2009 Mercedes-Benz CL has automatic transmission and 1960 Austin A 90 has manual transmission. 1960 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Austin A 90 2009 Mercedes-Benz CL
Make Austin Mercedes-Benz
Model A 90 CL
Year Released 1960 2009
Engine Position Front Front
Engine Size 2912 cc 5512 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 3 valves
Horse Power 102 HP 510 HP
Engine RPM 4500 RPM 5000 RPM
Torque 214 Nm 830 Nm
Torque RPM 2000 RPM 1800 RPM
Engine Compression Ratio 7.2:1 10.7:1
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1500 kg 2185 kg
Vehicle Length 4780 mm 5070 mm
Vehicle Width 1750 mm 1880 mm
Vehicle Height 1540 mm 1420 mm
Wheelbase Size 2750 mm 2960 mm
Fuel Tank Capacity 72 L 90 L