1960 Austin A 99 vs. 2012 Aston Martin V8 Vantage

To start off, 2012 Aston Martin V8 Vantage is newer by 52 year(s). Which means there will be less support and parts availability for 1960 Austin A 99. In addition, the cost of maintenance, including insurance, on 1960 Austin A 99 would be higher. At 4,700 cc (8 cylinders), 2012 Aston Martin V8 Vantage is equipped with a bigger engine. In terms of performance, 2012 Aston Martin V8 Vantage (430 HP @ 7300 RPM) has 324 more horse power than 1960 Austin A 99. (106 HP @ 4750 RPM) In normal driving conditions, 2012 Aston Martin V8 Vantage should accelerate faster than 1960 Austin A 99. With that said, vehicle weight also plays an important factor in acceleration. 2012 Aston Martin V8 Vantage weights approximately 160 kg more than 1960 Austin A 99. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Aston Martin V8 Vantage (489 Nm @ 5000 RPM) has 265 more torque (in Nm) than 1960 Austin A 99. (224 Nm @ 2500 RPM). This means 2012 Aston Martin V8 Vantage will have an easier job in driving up hills or pulling heavy equipment than 1960 Austin A 99. 2012 Aston Martin V8 Vantage has automatic transmission and 1960 Austin A 99 has manual transmission. 1960 Austin A 99 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Aston Martin V8 Vantage will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Austin A 99 2012 Aston Martin V8 Vantage
Make Austin Aston Martin
Model A 99 V8 Vantage
Year Released 1960 2012
Engine Position Front Front
Engine Size 2910 cc 4700 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 106 HP 430 HP
Engine RPM 4750 RPM 7300 RPM
Torque 224 Nm 489 Nm
Torque RPM 2500 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual 7-speed automated manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1530 kg 1690 kg
Vehicle Length 4950 mm 4382 mm
Vehicle Width 1750 mm 1867 mm
Vehicle Height 1540 mm 1260 mm
Wheelbase Size 2800 mm 2601 mm
Fuel Tank Capacity 34 L 80 L