1960 Autobianchi Bianchina vs. 2013 Cadillac ATS

To start off, 2013 Cadillac ATS is newer by 53 year(s). Which means there will be less support and parts availability for 1960 Autobianchi Bianchina. In addition, the cost of maintenance, including insurance, on 1960 Autobianchi Bianchina would be higher. At 3,600 cc (6 cylinders), 2013 Cadillac ATS is equipped with a bigger engine. In terms of performance, 2013 Cadillac ATS (317 HP @ 6800 RPM) has 293 more horse power than 1960 Autobianchi Bianchina. (24 HP @ 4600 RPM) In normal driving conditions, 2013 Cadillac ATS should accelerate faster than 1960 Autobianchi Bianchina. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac ATS weights approximately 1048 kg more than 1960 Autobianchi Bianchina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Cadillac ATS is all wheel drive (AWD), it will have significant more traction and grip than 1960 Autobianchi Bianchina. In wet, icy, snow, or gravel driving conditions, 2013 Cadillac ATS will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac ATS (373 Nm @ 4800 RPM) has 337 more torque (in Nm) than 1960 Autobianchi Bianchina. (36 Nm @ 3500 RPM). This means 2013 Cadillac ATS will have an easier job in driving up hills or pulling heavy equipment than 1960 Autobianchi Bianchina. 2013 Cadillac ATS has automatic transmission and 1960 Autobianchi Bianchina has manual transmission. 1960 Autobianchi Bianchina will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac ATS will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Autobianchi Bianchina 2013 Cadillac ATS
Make Autobianchi Cadillac
Model Bianchina ATS
Year Released 1960 2013
Body Type Convertible Sedan
Engine Position Rear Front
Engine Size 499 cc 3600 cc
Engine Cylinders 2 cylinders 6 cylinders
Engine Type in-line V
Horse Power 24 HP 317 HP
Engine RPM 4600 RPM 6800 RPM
Torque 36 Nm 373 Nm
Torque RPM 3500 RPM 4800 RPM
Engine Bore Size 67.4 mm 94 mm
Engine Stroke Size 70 mm 86 mm
Engine Compression Ratio 8.6:1 11.5
Fuel Type Gasoline Flex Fuel
Drive Type Rear AWD
Transmission Type Manual 6-speed automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 522 kg 1570 kg
Vehicle Length 3050 mm 4643 mm
Vehicle Width 1350 mm 1806 mm
Vehicle Height 1330 mm 1420 mm
Wheelbase Size 1840 mm 2776 mm
Fuel Tank Capacity 22 L 61 L