1960 Ferrari 250 GTE vs. 2000 Lotec C 1000
To start off, 2000 Lotec C 1000 is newer by 40 year(s). Which means there will be less support and parts availability for 1960 Ferrari 250 GTE. In addition, the cost of maintenance, including insurance, on 1960 Ferrari 250 GTE would be higher. At 5,500 cc (8 cylinders), 2000 Lotec C 1000 is equipped with a bigger engine. In terms of performance, 2000 Lotec C 1000 (843 HP @ 6000 RPM) has 611 more horse power than 1960 Ferrari 250 GTE. (232 HP @ 7000 RPM) In normal driving conditions, 2000 Lotec C 1000 should accelerate faster than 1960 Ferrari 250 GTE. With that said, vehicle weight also plays an important factor in acceleration. 1960 Ferrari 250 GTE weights approximately 350 kg more than 2000 Lotec C 1000.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Lotec C 1000 (990 Nm @ 3900 RPM) has 745 more torque (in Nm) than 1960 Ferrari 250 GTE. (245 Nm @ 5000 RPM). This means 2000 Lotec C 1000 will have an easier job in driving up hills or pulling heavy equipment than 1960 Ferrari 250 GTE.
Compare all specifications:
1960 Ferrari 250 GTE | 2000 Lotec C 1000 | |
Make | Ferrari | Lotec |
Model | 250 GTE | C 1000 |
Year Released | 1960 | 2000 |
Engine Position | Front | Middle |
Engine Size | 2953 cc | 5500 cc |
Engine Cylinders | 12 cylinders | 8 cylinders |
Engine Type | V | V |
Horse Power | 232 HP | 843 HP |
Engine RPM | 7000 RPM | 6000 RPM |
Torque | 245 Nm | 990 Nm |
Torque RPM | 5000 RPM | 3900 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1430 kg | 1080 kg |
Vehicle Length | 4710 mm | 4300 mm |
Vehicle Width | 1780 mm | 2010 mm |
Vehicle Height | 1370 mm | 1150 mm |