1960 Fiat 500 vs. 2008 Peugeot 107
To start off, 2008 Peugeot 107 is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Fiat 500. In addition, the cost of maintenance, including insurance, on 1960 Fiat 500 would be higher. At 998 cc (3 cylinders), 2008 Peugeot 107 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 107 weights approximately 275 kg more than 1960 Fiat 500.
Because 1960 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 107, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 107 (93 Nm @ 3600 RPM) has 63 more torque (in Nm) than 1960 Fiat 500. (30 Nm @ 3200 RPM). This means 2008 Peugeot 107 will have an easier job in driving up hills or pulling heavy equipment than 1960 Fiat 500.
Compare all specifications:
| 1960 Fiat 500 | 2008 Peugeot 107 | |
| Make | Fiat | Peugeot |
| Model | 500 | 107 |
| Year Released | 1960 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 500 cc | 998 cc |
| Engine Cylinders | 2 cylinders | 3 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 18 HP | 0 HP |
| Torque | 30 Nm | 93 Nm |
| Torque RPM | 3200 RPM | 3600 RPM |
| Engine Compression Ratio | 7.1:1 | 10.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 3 doors | 5 doors |
| Vehicle Weight | 555 kg | 830 kg |
| Vehicle Length | 3190 mm | 3440 mm |
| Vehicle Width | 1330 mm | 1640 mm |
| Vehicle Height | 1360 mm | 1480 mm |
| Wheelbase Size | 1960 mm | 2350 mm |
