1960 Fiat 600 vs. 1988 Oldsmobile Cutlass

To start off, 1988 Oldsmobile Cutlass is newer by 28 year(s). Which means there will be less support and parts availability for 1960 Fiat 600. In addition, the cost of maintenance, including insurance, on 1960 Fiat 600 would be higher. At 1,997 cc (4 cylinders), 1988 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1988 Oldsmobile Cutlass (163 HP @ 5600 RPM) has 143 more horse power than 1960 Fiat 600. (20 HP @ 4600 RPM) In normal driving conditions, 1988 Oldsmobile Cutlass should accelerate faster than 1960 Fiat 600. With that said, vehicle weight also plays an important factor in acceleration. 1988 Oldsmobile Cutlass weights approximately 450 kg more than 1960 Fiat 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1960 Fiat 600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Fiat 600. However, in wet, icy, snow, or gravel driving conditions, 1988 Oldsmobile Cutlass, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Oldsmobile Cutlass (237 Nm @ 4000 RPM) has 197 more torque (in Nm) than 1960 Fiat 600. (40 Nm @ 3000 RPM). This means 1988 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 1960 Fiat 600. 1988 Oldsmobile Cutlass has automatic transmission and 1960 Fiat 600 has manual transmission. 1960 Fiat 600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.

Compare all specifications: