1960 Ford Taunus vs. 1964 Toyota Corona

To start off, 1964 Toyota Corona is newer by 4 year(s). Which means there will be less support and parts availability for 1960 Ford Taunus. In addition, the cost of maintenance, including insurance, on 1960 Ford Taunus would be higher. At 1,758 cc (4 cylinders), 1960 Ford Taunus is equipped with a bigger engine. In terms of performance, 1960 Ford Taunus (70 HP @ 4500 RPM) has 32 more horse power than 1964 Toyota Corona. (38 HP @ 5000 RPM). In normal driving conditions, 1960 Ford Taunus should accelerate faster than 1964 Toyota Corona. With that said, vehicle weight also plays an important factor in acceleration. 1960 Ford Taunus weights approximately 56 kg more than 1964 Toyota Corona. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Ford Taunus (140 Nm @ 2200 RPM) has 72 more torque (in Nm) than 1964 Toyota Corona. (68 Nm @ 3200 RPM). This means 1960 Ford Taunus will have an easier job in driving up hills or pulling heavy equipment than 1964 Toyota Corona.

Compare all specifications:

1960 Ford Taunus 1964 Toyota Corona
Make Ford Toyota
Model Taunus Corona
Year Released 1960 1964
Engine Position Front Front
Engine Size 1758 cc 997 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 70 HP 38 HP
Engine RPM 4500 RPM 5000 RPM
Torque 140 Nm 68 Nm
Torque RPM 2200 RPM 3200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Vehicle Weight 996 kg 940 kg
Vehicle Length 4460 mm 4000 mm
Vehicle Width 1680 mm 1500 mm
Vehicle Height 1460 mm 1450 mm
Wheelbase Size 2640 mm 2410 mm