1960 Holden FC vs. 1963 Isuzu Bellel
To start off, 1963 Isuzu Bellel is newer by 3 year(s). Which means there will be less support and parts availability for 1960 Holden FC. In addition, the cost of maintenance, including insurance, on 1960 Holden FC would be higher. At 2,165 cc (6 cylinders), 1960 Holden FC is equipped with a bigger engine. In terms of performance, 1960 Holden FC (62 HP @ 4000 RPM) has 7 more horse power than 1963 Isuzu Bellel. (55 HP @ 3800 RPM). In normal driving conditions, 1960 Holden FC should accelerate faster than 1963 Isuzu Bellel. With that said, vehicle weight also plays an important factor in acceleration. 1963 Isuzu Bellel weights approximately 352 kg more than 1960 Holden FC.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Holden FC (150 Nm @ 1400 RPM) has 29 more torque (in Nm) than 1963 Isuzu Bellel. (121 Nm @ 2200 RPM). This means 1960 Holden FC will have an easier job in driving up hills or pulling heavy equipment than 1963 Isuzu Bellel.
Compare all specifications:
1960 Holden FC | 1963 Isuzu Bellel | |
Make | Holden | Isuzu |
Model | FC | Bellel |
Year Released | 1960 | 1963 |
Engine Position | Front | Front |
Engine Size | 2165 cc | 1991 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 62 HP | 55 HP |
Engine RPM | 4000 RPM | 3800 RPM |
Torque | 150 Nm | 121 Nm |
Torque RPM | 1400 RPM | 2200 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 980 kg | 1332 kg |
Vehicle Length | 4480 mm | 4450 mm |
Vehicle Width | 1710 mm | 1700 mm |
Vehicle Height | 1560 mm | 1550 mm |
Wheelbase Size | 2670 mm | 2540 mm |