1960 Isuzu Minx vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 50 year(s). Which means there will be less support and parts availability for 1960 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1960 Isuzu Minx would be higher. At 2,736 cc (6 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (183 HP @ 5500 RPM) has 121 more horse power than 1960 Isuzu Minx. (62 HP @ 5000 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1960 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 790 kg more than 1960 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Isuzu Minx is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Isuzu Minx. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (256 Nm @ 4000 RPM) has 143 more torque (in Nm) than 1960 Isuzu Minx. (113 Nm @ 2400 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1960 Isuzu Minx. 2010 Chrysler Sebring has automatic transmission and 1960 Isuzu Minx has manual transmission. 1960 Isuzu Minx will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1960 Isuzu Minx | 2010 Chrysler Sebring | |
Make | Isuzu | Chrysler |
Model | Minx | Sebring |
Year Released | 1960 | 2010 |
Engine Position | Front | Front |
Engine Size | 1491 cc | 2736 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 62 HP | 183 HP |
Engine RPM | 5000 RPM | 5500 RPM |
Torque | 113 Nm | 256 Nm |
Torque RPM | 2400 RPM | 4000 RPM |
Engine Bore Size | 79 mm | 86 mm |
Engine Stroke Size | 75 mm | 78.5 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1030 kg | 1820 kg |
Vehicle Length | 4120 mm | 4940 mm |
Vehicle Width | 1550 mm | 1850 mm |
Vehicle Height | 1520 mm | 1490 mm |
Wheelbase Size | 2440 mm | 2770 mm |