1960 Lancia Appia vs. 1995 Mitsubishi Diamante
To start off, 1995 Mitsubishi Diamante is newer by 35 year(s). Which means there will be less support and parts availability for 1960 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Appia would be higher. At 3,495 cc (6 cylinders), 1995 Mitsubishi Diamante is equipped with a bigger engine. In terms of performance, 1995 Mitsubishi Diamante (205 HP @ 5000 RPM) has 150 more horse power than 1960 Lancia Appia. (55 HP @ 4900 RPM) In normal driving conditions, 1995 Mitsubishi Diamante should accelerate faster than 1960 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1995 Mitsubishi Diamante weights approximately 745 kg more than 1960 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 1995 Mitsubishi Diamante, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Mitsubishi Diamante (306 Nm @ 3000 RPM) has 218 more torque (in Nm) than 1960 Lancia Appia. (88 Nm @ 3500 RPM). This means 1995 Mitsubishi Diamante will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Appia. 1995 Mitsubishi Diamante has automatic transmission and 1960 Lancia Appia has manual transmission. 1960 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1995 Mitsubishi Diamante will be easier to drive especially in heavy traffic.
Compare all specifications:
1960 Lancia Appia | 1995 Mitsubishi Diamante | |
Make | Lancia | Mitsubishi |
Model | Appia | Diamante |
Year Released | 1960 | 1995 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 3495 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 55 HP | 205 HP |
Engine RPM | 4900 RPM | 5000 RPM |
Torque | 88 Nm | 306 Nm |
Torque RPM | 3500 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 805 kg | 1550 kg |
Vehicle Length | 4200 mm | 4810 mm |
Vehicle Width | 1430 mm | 1790 mm |
Vehicle Height | 1250 mm | 1450 mm |
Wheelbase Size | 2520 mm | 2730 mm |