1960 Lancia Appia vs. 2003 Oldsmobile Bravada

To start off, 2003 Oldsmobile Bravada is newer by 43 year(s). Which means there will be less support and parts availability for 1960 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Appia would be higher. At 4,195 cc (6 cylinders), 2003 Oldsmobile Bravada is equipped with a bigger engine. In terms of performance, 2003 Oldsmobile Bravada (271 HP @ 6000 RPM) has 216 more horse power than 1960 Lancia Appia. (55 HP @ 4900 RPM) In normal driving conditions, 2003 Oldsmobile Bravada should accelerate faster than 1960 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2003 Oldsmobile Bravada weights approximately 1195 kg more than 1960 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Oldsmobile Bravada is four wheel drive (4WD), it will have significant more traction and grip than 1960 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2003 Oldsmobile Bravada will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Oldsmobile Bravada (373 Nm @ 3600 RPM) has 285 more torque (in Nm) than 1960 Lancia Appia. (88 Nm @ 3500 RPM). This means 2003 Oldsmobile Bravada will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Appia. 2003 Oldsmobile Bravada has automatic transmission and 1960 Lancia Appia has manual transmission. 1960 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Oldsmobile Bravada will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Lancia Appia 2003 Oldsmobile Bravada
Make Lancia Oldsmobile
Model Appia Bravada
Year Released 1960 2003
Engine Position Front Front
Engine Size 1090 cc 4195 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 55 HP 271 HP
Engine RPM 4900 RPM 6000 RPM
Torque 88 Nm 373 Nm
Torque RPM 3500 RPM 3600 RPM
Engine Bore Size 68 mm 93 mm
Engine Stroke Size 75 mm 102 mm
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 805 kg 2000 kg
Vehicle Length 4200 mm 4880 mm
Vehicle Width 1430 mm 1840 mm
Vehicle Height 1250 mm 1790 mm
Wheelbase Size 2520 mm 2880 mm
Fuel Tank Capacity 37 L 76 L