1960 Lancia Flavia vs. 1998 Ford Contour

To start off, 1998 Ford Contour is newer by 38 year(s). Which means there will be less support and parts availability for 1960 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Flavia would be higher. At 1,989 cc (4 cylinders), 1998 Ford Contour is equipped with a bigger engine. In terms of performance, 1998 Ford Contour (128 HP @ 5500 RPM) has 52 more horse power than 1960 Lancia Flavia. (76 HP @ 5800 RPM) In normal driving conditions, 1998 Ford Contour should accelerate faster than 1960 Lancia Flavia. With that said, vehicle weight also plays an important factor in acceleration. 1998 Ford Contour weights approximately 52 kg more than 1960 Lancia Flavia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1960 Lancia Flavia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Lancia Flavia. However, in wet, icy, snow, or gravel driving conditions, 1998 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Ford Contour (180 Nm @ 4000 RPM) has 65 more torque (in Nm) than 1960 Lancia Flavia. (115 Nm @ 4500 RPM). This means 1998 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Flavia. 1998 Ford Contour has automatic transmission and 1960 Lancia Flavia has manual transmission. 1960 Lancia Flavia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Ford Contour will be easier to drive especially in heavy traffic.

Compare all specifications:

1960 Lancia Flavia 1998 Ford Contour
Make Lancia Ford
Model Flavia Contour
Year Released 1960 1998
Engine Position Front Front
Engine Size 1488 cc 1989 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 76 HP 128 HP
Engine RPM 5800 RPM 5500 RPM
Torque 115 Nm 180 Nm
Torque RPM 4500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1190 kg 1242 kg
Vehicle Length 4590 mm 4680 mm
Vehicle Width 1620 mm 1760 mm
Vehicle Height 1520 mm 1380 mm
Wheelbase Size 2660 mm 2710 mm