1960 Lancia Flavia vs. 2013 Cadillac ATS

To start off, 2013 Cadillac ATS is newer by 53 year(s). Which means there will be less support and parts availability for 1960 Lancia Flavia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Flavia would be higher. At 2,000 cc (4 cylinders), 2013 Cadillac ATS is equipped with a bigger engine. In terms of performance, 2013 Cadillac ATS (268 HP @ 5500 RPM) has 177 more horse power than 1960 Lancia Flavia. (91 HP @ 5800 RPM) In normal driving conditions, 2013 Cadillac ATS should accelerate faster than 1960 Lancia Flavia.

Because 2013 Cadillac ATS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Cadillac ATS. However, in wet, icy, snow, or gravel driving conditions, 1960 Lancia Flavia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac ATS (353 Nm @ 5500 RPM) has 238 more torque (in Nm) than 1960 Lancia Flavia. (115 Nm @ 4500 RPM). This means 2013 Cadillac ATS will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Flavia.

Compare all specifications:

1960 Lancia Flavia 2013 Cadillac ATS
Make Lancia Cadillac
Model Flavia ATS
Year Released 1960 2013
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 1488 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type boxer in-line
Horse Power 91 HP 268 HP
Engine RPM 5800 RPM 5500 RPM
Torque 115 Nm 353 Nm
Torque RPM 4500 RPM 5500 RPM
Engine Bore Size 82 mm 86 mm
Engine Stroke Size 71 mm 86 mm
Drive Type Front Rear
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Length 4490 mm 4643 mm
Vehicle Width 1620 mm 1806 mm
Vehicle Height 1350 mm 1410 mm
Fuel Tank Capacity 42 L 61 L