1960 Mercedes-Benz 300 vs. 2013 Hyundai Elantra
To start off, 2013 Hyundai Elantra is newer by 53 year(s). Which means there will be less support and parts availability for 1960 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1960 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1960 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1960 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 92 more horse power than 2013 Hyundai Elantra. (146 HP @ 6500 RPM). In normal driving conditions, 1960 Mercedes-Benz 300 should accelerate faster than 2013 Hyundai Elantra. With that said, vehicle weight also plays an important factor in acceleration. 1960 Mercedes-Benz 300 weights approximately 81 kg more than 2013 Hyundai Elantra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2013 Hyundai Elantra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 93 more torque (in Nm) than 2013 Hyundai Elantra. (178 Nm @ 4700 RPM). This means 1960 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2013 Hyundai Elantra. 2013 Hyundai Elantra has automatic transmission and 1960 Mercedes-Benz 300 has manual transmission. 1960 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Hyundai Elantra will be easier to drive especially in heavy traffic.
Compare all specifications:
1960 Mercedes-Benz 300 | 2013 Hyundai Elantra | |
Make | Mercedes-Benz | Hyundai |
Model | 300 | Elantra |
Year Released | 1960 | 2013 |
Engine Position | Front | Front |
Engine Size | 2996 cc | 1797 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 238 HP | 146 HP |
Engine RPM | 5800 RPM | 6500 RPM |
Torque | 271 Nm | 178 Nm |
Torque RPM | 4600 RPM | 4700 RPM |
Engine Bore Size | 85 mm | 81 mm |
Engine Stroke Size | 88 mm | 87 mm |
Engine Compression Ratio | 7.6:1 | 10.3:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1386 kg | 1305 kg |
Vehicle Length | 4530 mm | 4540 mm |
Vehicle Width | 1800 mm | 1775 mm |
Vehicle Height | 1310 mm | 1435 mm |
Wheelbase Size | 2410 mm | 2750 mm |
Fuel Tank Capacity | 100 L | 50 L |