1960 Morris Minor vs. 2006 Holden UTE

To start off, 2006 Holden UTE is newer by 46 year(s). Which means there will be less support and parts availability for 1960 Morris Minor. In addition, the cost of maintenance, including insurance, on 1960 Morris Minor would be higher. At 3,789 cc (6 cylinders), 2006 Holden UTE is equipped with a bigger engine. In terms of performance, 2006 Holden UTE (204 HP @ 5200 RPM) has 168 more horse power than 1960 Morris Minor. (36 HP @ 4750 RPM) In normal driving conditions, 2006 Holden UTE should accelerate faster than 1960 Morris Minor. With that said, vehicle weight also plays an important factor in acceleration. 2006 Holden UTE weights approximately 708 kg more than 1960 Morris Minor. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Holden UTE (305 Nm @ 3600 RPM) has 237 more torque (in Nm) than 1960 Morris Minor. (68 Nm @ 2500 RPM). This means 2006 Holden UTE will have an easier job in driving up hills or pulling heavy equipment than 1960 Morris Minor.

Compare all specifications:

1960 Morris Minor 2006 Holden UTE
Make Morris Holden
Model Minor UTE
Year Released 1960 2006
Engine Position Front Front
Engine Size 948 cc 3789 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 36 HP 204 HP
Engine RPM 4750 RPM 5200 RPM
Torque 68 Nm 305 Nm
Torque RPM 2500 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 792 kg 1500 kg
Vehicle Length 3770 mm 5060 mm
Vehicle Width 1560 mm 1850 mm
Vehicle Height 1530 mm 1490 mm
Wheelbase Size 2190 mm 2950 mm