1961 Abarth 1600 vs. 1952 Jeep CJ3A
To start off, 1961 Abarth 1600 is newer by 9 year(s). Which means there will be less support and parts availability for 1952 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1952 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1952 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1961 Abarth 1600 (89 HP @ 6000 RPM) has 30 more horse power than 1952 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1961 Abarth 1600 should accelerate faster than 1952 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1952 Jeep CJ3A weights approximately 150 kg more than 1961 Abarth 1600.
Because 1952 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1961 Abarth 1600. In wet, icy, snow, or gravel driving conditions, 1952 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Jeep CJ3A (145 Nm @ 3600 RPM) has 7 more torque (in Nm) than 1961 Abarth 1600. (138 Nm @ 4600 RPM). This means 1952 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1961 Abarth 1600.
Compare all specifications:
1961 Abarth 1600 | 1952 Jeep CJ3A | |
Make | Abarth | Jeep |
Model | 1600 | CJ3A |
Year Released | 1961 | 1952 |
Engine Position | Front | Front |
Engine Size | 1586 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 89 HP | 59 HP |
Engine RPM | 6000 RPM | 3600 RPM |
Torque | 138 Nm | 145 Nm |
Torque RPM | 4600 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 960 kg | 1110 kg |
Vehicle Length | 4040 mm | 3130 mm |
Vehicle Width | 1590 mm | 1460 mm |
Vehicle Height | 1280 mm | 1630 mm |
Wheelbase Size | 2350 mm | 2040 mm |