1961 Abarth 750 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 47 year(s). Which means there will be less support and parts availability for 1961 Abarth 750. In addition, the cost of maintenance, including insurance, on 1961 Abarth 750 would be higher. At 1,598 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 645 kg more than 1961 Abarth 750.

Because 1961 Abarth 750 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Abarth 750. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (146 Nm @ 4000 RPM) has 89 more torque (in Nm) than 1961 Abarth 750. (57 Nm @ 4500 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1961 Abarth 750.

Compare all specifications:

1961 Abarth 750 2008 Mazda 3
Make Abarth Mazda
Model 750 3
Year Released 1961 2008
Engine Position Rear Front
Engine Size 747 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 43 HP 0 HP
Torque 57 Nm 146 Nm
Torque RPM 4500 RPM 4000 RPM
Engine Bore Size 61 mm 78 mm
Engine Stroke Size 64 mm 83.6 mm
Engine Compression Ratio 8.5:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 535 kg 1180 kg
Vehicle Length 3300 mm 4500 mm
Vehicle Height 1410 mm 1760 mm
Wheelbase Size 2010 mm 2650 mm
Fuel Tank Capacity 27 L 55 L