1961 Alfa Romeo 2600 vs. 2013 Hyundai Santa Fe
To start off, 2013 Hyundai Santa Fe is newer by 52 year(s). Which means there will be less support and parts availability for 1961 Alfa Romeo 2600. In addition, the cost of maintenance, including insurance, on 1961 Alfa Romeo 2600 would be higher. At 2,583 cc (6 cylinders), 1961 Alfa Romeo 2600 is equipped with a bigger engine. In terms of performance, 2013 Hyundai Santa Fe (260 HP @ 6000 RPM) has 97 more horse power than 1961 Alfa Romeo 2600. (163 HP @ 5900 RPM) In normal driving conditions, 2013 Hyundai Santa Fe should accelerate faster than 1961 Alfa Romeo 2600. With that said, vehicle weight also plays an important factor in acceleration. 2013 Hyundai Santa Fe weights approximately 320 kg more than 1961 Alfa Romeo 2600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1961 Alfa Romeo 2600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Alfa Romeo 2600. However, in wet, icy, snow, or gravel driving conditions, 2013 Hyundai Santa Fe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Hyundai Santa Fe (365 Nm @ 3000 RPM) has 145 more torque (in Nm) than 1961 Alfa Romeo 2600. (220 Nm @ 4000 RPM). This means 2013 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 1961 Alfa Romeo 2600. 2013 Hyundai Santa Fe has automatic transmission and 1961 Alfa Romeo 2600 has manual transmission. 1961 Alfa Romeo 2600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Hyundai Santa Fe will be easier to drive especially in heavy traffic.
Compare all specifications:
1961 Alfa Romeo 2600 | 2013 Hyundai Santa Fe | |
Make | Alfa Romeo | Hyundai |
Model | 2600 | Santa Fe |
Year Released | 1961 | 2013 |
Engine Position | Front | Front |
Engine Size | 2583 cc | 1998 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 163 HP | 260 HP |
Engine RPM | 5900 RPM | 6000 RPM |
Torque | 220 Nm | 365 Nm |
Torque RPM | 4000 RPM | 3000 RPM |
Engine Bore Size | 83 mm | 86 mm |
Engine Stroke Size | 79.6 mm | 86 mm |
Engine Compression Ratio | 9.0:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1370 kg | 1690 kg |
Vehicle Length | 4590 mm | 4690 mm |
Vehicle Width | 1710 mm | 1880 mm |
Vehicle Height | 1330 mm | 1690 mm |
Wheelbase Size | 2510 mm | 2700 mm |
Fuel Tank Capacity | 60 L | 66 L |