1961 Aston Martin DB2 vs. 2009 Mercedes-Benz CL

To start off, 2009 Mercedes-Benz CL is newer by 48 year(s). Which means there will be less support and parts availability for 1961 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1961 Aston Martin DB2 would be higher. At 5,461 cc (8 cylinders), 2009 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CL (377 HP @ 6000 RPM) has 259 more horse power than 1961 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2009 Mercedes-Benz CL should accelerate faster than 1961 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CL weights approximately 50 kg more than 1961 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2009 Mercedes-Benz CL is four wheel drive (4WD), it will have significant more traction and grip than 1961 Aston Martin DB2. In wet, icy, snow, or gravel driving conditions, 2009 Mercedes-Benz CL will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CL (391 Nm @ 4800 RPM) has 151 more torque (in Nm) than 1961 Aston Martin DB2. (240 Nm @ 3000 RPM). This means 2009 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1961 Aston Martin DB2. 2009 Mercedes-Benz CL has automatic transmission and 1961 Aston Martin DB2 has manual transmission. 1961 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1961 Aston Martin DB2 2009 Mercedes-Benz CL
Make Aston Martin Mercedes-Benz
Model DB2 CL
Year Released 1961 2009
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 2922 cc 5461 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 118 HP 377 HP
Engine RPM 5000 RPM 6000 RPM
Torque 240 Nm 391 Nm
Torque RPM 3000 RPM 4800 RPM
Engine Compression Ratio 9.0:1 10.7:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1175 kg 1225 kg
Vehicle Length 4310 mm 5070 mm
Vehicle Width 1660 mm 1880 mm
Vehicle Height 1370 mm 1420 mm
Wheelbase Size 2520 mm 2960 mm
Fuel Tank Capacity 86 L 90 L