1961 Austin A vs. 1988 Suzuki SJ 413
To start off, 1988 Suzuki SJ 413 is newer by 27 year(s). Which means there will be less support and parts availability for 1961 Austin A. In addition, the cost of maintenance, including insurance, on 1961 Austin A would be higher. At 1,489 cc (4 cylinders), 1961 Austin A is equipped with a bigger engine. In terms of performance, 1988 Suzuki SJ 413 (64 HP @ 5500 RPM) has 26 more horse power than 1961 Austin A. (38 HP @ 4000 RPM) In normal driving conditions, 1988 Suzuki SJ 413 should accelerate faster than 1961 Austin A. With that said, vehicle weight also plays an important factor in acceleration. 1961 Austin A weights approximately 275 kg more than 1988 Suzuki SJ 413.
Because 1988 Suzuki SJ 413 is four wheel drive (4WD), it will have significant more traction and grip than 1961 Austin A. In wet, icy, snow, or gravel driving conditions, 1988 Suzuki SJ 413 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1961 Austin A (87 Nm @ 1900 RPM) has 13 more torque (in Nm) than 1988 Suzuki SJ 413. (74 Nm @ 3000 RPM). This means 1961 Austin A will have an easier job in driving up hills or pulling heavy equipment than 1988 Suzuki SJ 413.
Compare all specifications:
| 1961 Austin A | 1988 Suzuki SJ 413 | |
| Make | Austin | Suzuki |
| Model | A | SJ 413 |
| Year Released | 1961 | 1988 |
| Engine Position | Front | Front |
| Engine Size | 1489 cc | 1269 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 38 HP | 64 HP |
| Engine RPM | 4000 RPM | 5500 RPM |
| Torque | 87 Nm | 74 Nm |
| Torque RPM | 1900 RPM | 3000 RPM |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Rear | 4WD |
| Vehicle Weight | 1145 kg | 870 kg |
| Vehicle Length | 4440 mm | 3450 mm |
| Vehicle Width | 1620 mm | 1470 mm |
| Vehicle Height | 1530 mm | 1700 mm |
| Wheelbase Size | 2560 mm | 2040 mm |
