1961 Bristol 406 vs. 2000 Cadillac Seville
To start off, 2000 Cadillac Seville is newer by 39 year(s). Which means there will be less support and parts availability for 1961 Bristol 406. In addition, the cost of maintenance, including insurance, on 1961 Bristol 406 would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (290 HP @ 6000 RPM) has 198 more horse power than 1961 Bristol 406. (92 HP @ 4700 RPM) In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1961 Bristol 406. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 567 kg more than 1961 Bristol 406. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1961 Bristol 406 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Bristol 406. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4400 RPM) has 226 more torque (in Nm) than 1961 Bristol 406. (174 Nm @ 3000 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1961 Bristol 406. 2000 Cadillac Seville has automatic transmission and 1961 Bristol 406 has manual transmission. 1961 Bristol 406 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1961 Bristol 406 | 2000 Cadillac Seville | |
Make | Bristol | Cadillac |
Model | 406 | Seville |
Year Released | 1961 | 2000 |
Engine Position | Front | Front |
Engine Size | 2216 cc | 4572 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 92 HP | 290 HP |
Engine RPM | 4700 RPM | 6000 RPM |
Torque | 174 Nm | 400 Nm |
Torque RPM | 3000 RPM | 4400 RPM |
Engine Bore Size | 68.7 mm | 93 mm |
Engine Stroke Size | 99.6 mm | 84 mm |
Engine Compression Ratio | 9.0:1 | 10.0:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1260 kg | 1827 kg |
Vehicle Length | 4980 mm | 5000 mm |
Vehicle Width | 1720 mm | 1910 mm |
Vehicle Height | 1530 mm | 1410 mm |
Wheelbase Size | 2900 mm | 2890 mm |
Fuel Tank Capacity | 81 L | 70 L |