1961 Fiat 2300 vs. 2000 Mercedes-Benz E

To start off, 2000 Mercedes-Benz E is newer by 39 year(s). Which means there will be less support and parts availability for 1961 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1961 Fiat 2300 would be higher. At 2,278 cc (6 cylinders), 1961 Fiat 2300 is equipped with a bigger engine. In terms of performance, 2000 Mercedes-Benz E (160 HP @ 5300 RPM) has 45 more horse power than 1961 Fiat 2300. (115 HP @ 5300 RPM) In normal driving conditions, 2000 Mercedes-Benz E should accelerate faster than 1961 Fiat 2300. With that said, vehicle weight also plays an important factor in acceleration. 2000 Mercedes-Benz E weights approximately 365 kg more than 1961 Fiat 2300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Mercedes-Benz E (230 Nm @ 2500 RPM) has 42 more torque (in Nm) than 1961 Fiat 2300. (188 Nm @ 3000 RPM). This means 2000 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1961 Fiat 2300. 2000 Mercedes-Benz E has automatic transmission and 1961 Fiat 2300 has manual transmission. 1961 Fiat 2300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Mercedes-Benz E will be easier to drive especially in heavy traffic.

Compare all specifications:

1961 Fiat 2300 2000 Mercedes-Benz E
Make Fiat Mercedes-Benz
Model 2300 E
Year Released 1961 2000
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2278 cc 1998 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 115 HP 160 HP
Engine RPM 5300 RPM 5300 RPM
Torque 188 Nm 230 Nm
Torque RPM 3000 RPM 2500 RPM
Engine Bore Size 78 mm 90 mm
Engine Stroke Size 79.5 mm 78.7 mm
Engine Compression Ratio 9.0:1 9.5:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1235 kg 1600 kg
Vehicle Length 4470 mm 4820 mm
Vehicle Width 1620 mm 1810 mm
Vehicle Height 1480 mm 1450 mm
Wheelbase Size 2660 mm 2720 mm
Fuel Tank Capacity 70 L 70 L