1961 Fiat 2300 vs. 2010 Ford Ka

To start off, 2010 Ford Ka is newer by 49 year(s). Which means there will be less support and parts availability for 1961 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1961 Fiat 2300 would be higher. At 2,277 cc (6 cylinders), 1961 Fiat 2300 is equipped with a bigger engine. In terms of performance, 1961 Fiat 2300 (136 HP @ 5600 RPM) has 68 more horse power than 2010 Ford Ka. (68 HP @ 5500 RPM). In normal driving conditions, 1961 Fiat 2300 should accelerate faster than 2010 Ford Ka.

Because 1961 Fiat 2300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Fiat 2300. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Ka, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1961 Fiat 2300 (197 Nm @ 4000 RPM) has 91 more torque (in Nm) than 2010 Ford Ka. (106 Nm @ 3000 RPM). This means 1961 Fiat 2300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Ka.

Compare all specifications:

1961 Fiat 2300 2010 Ford Ka
Make Fiat Ford
Model 2300 Ka
Year Released 1961 2010
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2277 cc 1297 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 136 HP 68 HP
Engine RPM 5600 RPM 5500 RPM
Torque 197 Nm 106 Nm
Torque RPM 4000 RPM 3000 RPM
Engine Bore Size 78 mm 74.1 mm
Engine Stroke Size 79.5 mm 75.5 mm
Engine Compression Ratio 9.5:1 10.2:1
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Length 4630 mm 3630 mm
Vehicle Width 1640 mm 1830 mm
Vehicle Height 1390 mm 1390 mm
Wheelbase Size 2660 mm 2450 mm
Fuel Tank Capacity 70 L 40 L