1961 Isuzu Bellel vs. 1959 Lancia Appia

To start off, 1961 Isuzu Bellel is newer by 2 year(s). Which means there will be less support and parts availability for 1959 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1959 Lancia Appia would be higher. At 1,991 cc (4 cylinders), 1961 Isuzu Bellel is equipped with a bigger engine. In terms of performance, 1961 Isuzu Bellel (85 HP @ 4600 RPM) has 33 more horse power than 1959 Lancia Appia. (52 HP @ 4900 RPM). In normal driving conditions, 1961 Isuzu Bellel should accelerate faster than 1959 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 1961 Isuzu Bellel weights approximately 240 kg more than 1959 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1961 Isuzu Bellel (151 Nm @ 1800 RPM) has 64 more torque (in Nm) than 1959 Lancia Appia. (87 Nm @ 3500 RPM). This means 1961 Isuzu Bellel will have an easier job in driving up hills or pulling heavy equipment than 1959 Lancia Appia.

Compare all specifications:

1961 Isuzu Bellel 1959 Lancia Appia
Make Isuzu Lancia
Model Bellel Appia
Year Released 1961 1959
Engine Position Front Front
Engine Size 1991 cc 1090 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 85 HP 52 HP
Engine RPM 4600 RPM 4900 RPM
Torque 151 Nm 87 Nm
Torque RPM 1800 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1190 kg 950 kg
Vehicle Length 4490 mm 4160 mm
Vehicle Width 1700 mm 1520 mm
Vehicle Height 1500 mm 1330 mm
Wheelbase Size 2540 mm 2520 mm