1961 Lancia Appia vs. 2010 Land Rover Freelander

To start off, 2010 Land Rover Freelander is newer by 49 year(s). Which means there will be less support and parts availability for 1961 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1961 Lancia Appia would be higher. At 3,192 cc (6 cylinders), 2010 Land Rover Freelander is equipped with a bigger engine. In terms of performance, 2010 Land Rover Freelander (229 HP @ 6300 RPM) has 174 more horse power than 1961 Lancia Appia. (55 HP @ 4900 RPM) In normal driving conditions, 2010 Land Rover Freelander should accelerate faster than 1961 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Land Rover Freelander weights approximately 1827 kg more than 1961 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Land Rover Freelander is four wheel drive (4WD), it will have significant more traction and grip than 1961 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2010 Land Rover Freelander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Land Rover Freelander (317 Nm @ 3200 RPM) has 230 more torque (in Nm) than 1961 Lancia Appia. (87 Nm @ 3500 RPM). This means 2010 Land Rover Freelander will have an easier job in driving up hills or pulling heavy equipment than 1961 Lancia Appia. 2010 Land Rover Freelander has automatic transmission and 1961 Lancia Appia has manual transmission. 1961 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Land Rover Freelander will be easier to drive especially in heavy traffic.

Compare all specifications:

1961 Lancia Appia 2010 Land Rover Freelander
Make Lancia Land Rover
Model Appia Freelander
Year Released 1961 2010
Engine Position Front Front
Engine Size 1090 cc 3192 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 55 HP 229 HP
Engine RPM 4900 RPM 6300 RPM
Torque 87 Nm 317 Nm
Torque RPM 3500 RPM 3200 RPM
Engine Bore Size 68 mm 84 mm
Engine Stroke Size 75 mm 96 mm
Engine Compression Ratio 9.0:1 10.8:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 805 kg 2632 kg
Vehicle Length 4200 mm 4510 mm
Vehicle Width 1430 mm 1750 mm
Vehicle Height 1250 mm 2030 mm
Wheelbase Size 2520 mm 2670 mm
Fuel Consumption Overall 10.3 L/100km 16 L/100km
Fuel Tank Capacity 42 L 70 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]